EMF PAINT FAQ's

EMF Paint

Question:

I painted an exterior wall section facing a neighbour’s smart-meter, however I did not notice a change in my EMF meter’s readings, and there are still high spikes. What could be causing this?

Answer:

The paint you used blocks the RF signal emanating from smart meters, therefore there must be another source of EMR that your meter is picking up. For example:

1)      When measuring with your meter, make sure that your cell phone is not nearby

2)      Turn off internal RF sources in your home such as WiFi, cordless phones, Bluetooth devices, etc

3)      Your measurement equipment should be reliable, and always be sure that the battery is fully charged

 Question:

Can I use RF Shielding Paint to protect against Low-Frequency EMF?

Answer:

Our RF Paint can be used to shield against Low-Frequency (LF) electrical fields, however, in order to achieve the best results, the paint must first be grounded.

 Question:

Do you have paint to prevent RFID (radio-frequency identification) interference in shops and retail stores?

Answer:

RFID paint can be used by large retailers in their stores in order to block interference with their RFID and scanners for product tags and IDs. The RFID paint is easily applied and is very effective for this purpose.

 Question:

Do I need to ground the EMF Paint in order to get better EMF protection?

Answer:

The grounding effect on better EMF protection is only when shielding low frequency electrical fields. However, because of safety measures the paint must be grounded. It's simple to ground EMF paint with  GW grounding Plate and EB2 grounding strap. The full list of grounding accessories could be found in the EMF grounding Accessories section.

 Question:

Is it possible to use the EMF Paint for a spray application?

Answer: 

While this is possible, we would not recommend it. Usually, the spray nozzle, hose, and the paint tank will be not be able to be cleaned properly and thus may become unusable.